I recently wired up my Les Paul with a traditional LP set up but I added a 2 push-pull switches on the tone controls. It works but the "inner" coil stays ON and the outer coil turns off. I would like it to be opposite.
When the pickup is split I want the outer coils to be on. Is this possible? I'm using 2 Dimarzio 36th anniversary pickups. I wired them as per the Dimarzio web site with the black and white wires soldered together and going to the push-pull. Red=hot and green/bare=ground.
When the pickup is split I want the outer coils to be on. Is this possible? I'm using 2 Dimarzio 36th anniversary pickups. I wired them as per the Dimarzio web site with the black and white wires soldered together and going to the push-pull. Red=hot and green/bare=ground.
Comment