Tweet
Hi, I need help on this dearmond silver foil pup.
I messed it up by cutting the wire too short and am now trying to put new shielded cable on the lead and ground.
It still has the wax over the winding. I can't find the hot lead. I read that it is soldered to the base plates little notch, but I can't find it.
It has the original tape next to the notch but nothing under it.
I'm afraid of cutting the wax potting off and hacking up the winding.
So what is the best way of getting to the lead wire? Grounding is the opposite corner right?
I am not concerned with using vintage wire etc. I just want to get this working again.
Thanks.