$53.13 for this knob puller??

http://www.stewmac.com/Luthier_Tools...ng_Puller.html
I think that we could make one for under 10 bucks. I can get the clear plastic tube from the local plastic fabricator shop and for the metal jaws sheet metal stock from a hardware store could be hammered using a small vise (unless you can find something better.) The rubber cushioning on the bottom should only be needed when pulling bushings, not guitar knobs.
As for a bushing puller I already made one of those from a PVC fitting and nuts, bolts & washers.

Steve Ahola
http://www.stewmac.com/Luthier_Tools...ng_Puller.html
I think that we could make one for under 10 bucks. I can get the clear plastic tube from the local plastic fabricator shop and for the metal jaws sheet metal stock from a hardware store could be hammered using a small vise (unless you can find something better.) The rubber cushioning on the bottom should only be needed when pulling bushings, not guitar knobs.
As for a bushing puller I already made one of those from a PVC fitting and nuts, bolts & washers.
Steve Ahola
Comment