Need help with my LP wiring (push pull)

[guitarboyled]

I've got 4 push-pull pots on the way and I made up the following diagram. I'm no expert so if you guys could tell if it makes any sense.

Bridge Volume - Gets the two coils in the bridge pup in either parallel or series

Neck Volume - Gets the two coils in the neck pup in either parallel or series

Bridge Tone - Splits the coils (single coil) in either bridge or neck or both

Neck Tone - Puts the bridge pup out of phase

I figure the different configurations will be:

Bridge series
Bridge series + Neck series
Bridge series + Neck parallel

Bridge parallel
Bridge parallel + Neck series
Bridge parallel + Neck parallel

Bridge single
Bridge single + Neck single
Neck single

+ all the out of phase options

[guitarboyled]

PS I didn’t include the multiple grounds

[guitarboyled]

Here is the latest version.

Working on the coil split not sure it's ok