Ad Widget

Collapse

Announcement

Collapse
No announcement yet.

The math behind picking up hum.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • The math behind picking up hum.

    I'm curious about making humbuckers out of differing coils. Mismatched sizes, or different wire gauges, a larger "center" diameter to the coil, combinations there of, what have you.

    Just playing around, really.

    So I'm curious what I need to take into consideration to keep the two coils humbucking. There's a thread a ways back, where Joe Gwinn talks about what sort of difference we hear as humbucking enough, and a bit of math concerning the differences in hum voltages that will make a 20dB change in hum volume.

    Ignoring for a moment how the music signal is going to be picked up; what calculates how much hum a coil will pick up? I assume it may be fairly complex math; but I'm interested in learning what I can. Seems like some of the radio antenna design books my father has might point me in the right direction, but it's aimed at a different concept a bit.

    Is it total area of the surface of the wire? Number of turns, or something else? I understand it may be more involved than someone wants to explain in a forum post, but if someone wants to point me in the right direction so I know where to go with my research, or at least give me a tip as to the factors involved, that'd be awesome.

    Thanks!

  • #2
    Oh - never mind - I just saw Belwar's recent thread on dummy coils - it contains the information and links I needed. I guess I just wasn't searching on the right terms, and I hadn't read new posts before I posted this.

    Sorry!

    Comment

    Working...
    X