Tweet
If a mod feels the need to move this, I wont be offended.
I have an extra humbucker bobbin coil mount that im considering selling. It's CNC made from 6061 aluminum. Its designed to slide on top of a 1/2" shaft and lock in place with a 10-32 set screw. The face itself is the shape of an allparts humbucker bobbin not a fully round disk like many are used to. The bobbin mount has two 1/16th pins that fit perfectly through the mounting screw holes on a P-90 bobbin. The pins that come with it are long enough for 1 bobbin, but you could remove them and place longer pins in and load multiple bobbins at a time I suppose. The aluminum was cheap but the maching time was quite expensive. If anyone wants it i'd sell it for about $125.
You are interested send me a PM. I'll have pictures of it monday
b.
I have an extra humbucker bobbin coil mount that im considering selling. It's CNC made from 6061 aluminum. Its designed to slide on top of a 1/2" shaft and lock in place with a 10-32 set screw. The face itself is the shape of an allparts humbucker bobbin not a fully round disk like many are used to. The bobbin mount has two 1/16th pins that fit perfectly through the mounting screw holes on a P-90 bobbin. The pins that come with it are long enough for 1 bobbin, but you could remove them and place longer pins in and load multiple bobbins at a time I suppose. The aluminum was cheap but the maching time was quite expensive. If anyone wants it i'd sell it for about $125.
You are interested send me a PM. I'll have pictures of it monday
b.
Comment