Tweet
Hi there, been directed here as hopefully some of you may recognise these pickups. I don't know a hell of a lot about pickups but had this set about 10 years and haven't a clue what they are - nothing came up in searches.
They are made by a company called "Shin-ei Companion" in Japan. I guess they are made in the 70's but may be wrong. I'll show you some pictures before I go on . . .
Ring any bells? The size and shape suggest to me that they were intended to go in a rockabilly guitar. They have a very fat, plummy sound that is kind of "low end of a piano" like. has strong detailed bass and low mids but not much in the high frequencies. can feel a bit squashy, almost like tube rectifier sag or something.
Here are some blurry pictures of one of them with it's cover off.
The DC resistance of the pair is 6.49k and 6.66k. Despite the seemingly low output, they seem very loud.
To help explain the blurry pictures, there is a single wide coil. The wire used is green.
-- through the centre of the coil is a kind a blade pole piece thing.
-- on one side there are some adjustable pole pieces although aspersions have been cast by an educated source as to how adustable they are or whether they are just for show. They don't seem to be touching anything mechanical aside from maybe the magnet next to them or the base.
-- the magnets themselves are two long, slim bar magnets.
having never built my own pickups or even understand how they are made, i have very little knowledge on pickups. only other experience of non stock pickups was one made by a certain large scale manufacturer which cost a ridiculous amount for the shoddy quality and could never hold a candle to these 2 tacky looking jobs.
however, having had them for 10 years and being so different to anything else ive tried (both tonally and in looks), i am really curious as to what they are, what they are for, what made them sound like that etc.
if you can help at all i would appreciate it.
cheers
They are made by a company called "Shin-ei Companion" in Japan. I guess they are made in the 70's but may be wrong. I'll show you some pictures before I go on . . .
Ring any bells? The size and shape suggest to me that they were intended to go in a rockabilly guitar. They have a very fat, plummy sound that is kind of "low end of a piano" like. has strong detailed bass and low mids but not much in the high frequencies. can feel a bit squashy, almost like tube rectifier sag or something.
Here are some blurry pictures of one of them with it's cover off.
The DC resistance of the pair is 6.49k and 6.66k. Despite the seemingly low output, they seem very loud.
To help explain the blurry pictures, there is a single wide coil. The wire used is green.
-- through the centre of the coil is a kind a blade pole piece thing.
-- on one side there are some adjustable pole pieces although aspersions have been cast by an educated source as to how adustable they are or whether they are just for show. They don't seem to be touching anything mechanical aside from maybe the magnet next to them or the base.
-- the magnets themselves are two long, slim bar magnets.
having never built my own pickups or even understand how they are made, i have very little knowledge on pickups. only other experience of non stock pickups was one made by a certain large scale manufacturer which cost a ridiculous amount for the shoddy quality and could never hold a candle to these 2 tacky looking jobs.
however, having had them for 10 years and being so different to anything else ive tried (both tonally and in looks), i am really curious as to what they are, what they are for, what made them sound like that etc.
if you can help at all i would appreciate it.
cheers
Comment