New gaussmeter PCBs for sale....

[the great waldo]

Hi Elepro

Just to let you know my board arrived safe and sound, I thought I had lost the sensor board until I looked on the main board. Thanks very much.

Andrew

[ShepBush]

Same here Elepro. arrived safely...just wondering which is the best method to seperate the sensor board and shape it like in the pictures...Thanks, Mike

[-Elepro-]

....just wondering which is the best method to seperate the sensor board and shape it like in the pictures...Thanks, Mike

watch this post

http://music-electronics-forum.com/t20033-3/#post167435

bye

[ShepBush]

Sorry if I'm a bit dense Elepro but i've searched that thread and can't see any mention of how to actually split the board (saw, dremel, knife?) ..don't want to do the delicate paths any injury..limited experience with this type of work ! Thanks Mike

[-Elepro-]

i'm not sure to understood your last post... my link goes at post #75 in that thread.... where i explain how to cut the probe pcb...

bye

[ShepBush]

Sorry Elepro... I didn't look as properly as I thought...thanks for your help...Mike

[-Elepro-]

a built and tested gaussmeter is available for sale (complete with A1302 + AD22151 probe).... without enclosure....

for info contact me by PM

bye

[ShepBush]

Hi Elepro..there seems to be a long wait for the LCD...I live in Sweden and I wondered if I can substitute this:
https://www.elfa.se/elfa3~se_sv/elfa...tem=75-408-72;
or can you suggest an alternative...Thanks Mike

[-Elepro-]

it is not good because it has pinout on the bottom side.....
i often buy display in Poland.... (because cost with sipping is good for me)

Negozi eBay - 16x2, LCD su eBay.it

beware.. the one with black character on white backlight (my preferred colors) is a big display not good for our pcbs.... if you like those colors ask him... it has in normal dimension too
bye

[ShepBush]

Thanks for the link Elepro---Mike

[Corona Blue]

Elepro-
Thanks again for making this project available to all of us. Quality of the PC Board is A+.

Also, because I didn't see it mentioned here in the new thread:

Q1 = BS170
Q2 = BS170
Q3 = BC327


Best,
Allen

[-Elepro-]

here's the link at gaussmeter new pdf....

link

bye

[-Elepro-]

pcb and pic always available

ciao

[Danelectron]

pcb and pic always available

Are these still available? Thanks, Dan

[-Elepro-]

last two PCBs available at special price of 25euro (shipping included).....

bye