telecaster flatwork PDF/DXF or measurements

[big_teee]

Good to know, thanks for your help.
Onto the metal plate, copper/zinc plated so as it can be soldered. What is soldered to it? I assume it will be a ground wire connecting all the electronics and the ground on the jack input...

The black wire is soldered to the start lead of coil.
The wire solders to the ground eyelet and is left long enough to bend over and solder to baseplate.

[David Schwab]

Why not use Bakelite or FR4 (PCB material without copper) or even FR4 with a copper layer?
Thanks.

Why not!

A prototype of of mine:



And Duncan and DiMarzio use circuit boards on the bottom of their rail pickups.

People use the fiberboard because Fender used the fiberboard.