Announcement

Collapse
No announcement yet.

Need replacement pickup for Gibson BR-6 lap steel

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Need replacement pickup for Gibson BR-6 lap steel

    Need replacement pickup for Gibson BR-6 lap steel (I also posted this on main forum, sorry for duplication. Thought readers of this forum might be able to help me out or even wind and sell me a pickup to meet my needs.)

    I have what I believe to be is a mid 50's Gibson BR-6 (identified from information and photos on other web sites. ) I bought this used on Ebay a few years back, and much to my chagrin, found that someone had taken the original pickup out and slapped in some sort of humbucker. It works and all, but the distance from outside pole to outside pole is 2" on the pickup, and my strings are 2.25" apart. Doesn't work too well. The person installing it aligned the treble pole with the treble (highest) outside string, so the 6th pole is essentially under the 5th heavier string, and the 6th string is picked up very faintly. The overall sound is less than optimal, and I have not played it since I got it a few years back (I am a wiser ebay shopper now, lol). Anyway, have been getting into lap steel lately (have another Supro lap steel which works fine, love the tone and that formica finish!) but would like to also get this unit up and running. Anyone have suggestions on replacement pickup? I play blues, blues rock, some country rock, looking for that overdriven sweet tone, open E tuning (my supro sounds awesome, would also like see how sweet this gibby could sound with the right pickup, maybe play with alternative tunings on it.) help!

  • #2
    Here is a thread where the original pickup for those is discussed http://music-electronics-forum.com/t17349/
    If it were me, I'd probably contact Jason Lollar about having a replacement for the original made.

    Comment


    • #3
      thats a special size pickup with a special mounting plate- I make them but dont list them on my site , call the shop unless someone else would rather do it.

      Comment


      • #4
        Originally posted by jason lollar View Post
        thats a special size pickup with a special mounting plate- I make them but dont list them on my site , call the shop unless someone else would rather do it.
        Great, I will do that (call Jason's shop). Glad I found this site, I will be back. Thanks guys for fast response to my question.Tim

        Comment

        Working...
        X