seymour duncan humbuckers clockwise or anticlockwise winding?

[the great waldo]

Hi All

Does anyone know which direction seymour winds his duncan distortion pups and which gauge wire, it looks like 44awg TIA

cheers

andrew

[Jim Shine]

I have a recent Duncan SH14 apart and it is wound counterclockwise.

[the great waldo]

Hi Jim

Thanks for the note. I took a chance before I read your post and wound it counterclockwise using 0.050 mm wire 44awg I think about 6.2kt.

Cheers

Andrew

[MrCandy]

Hi Jim

Thanks for the note. I took a chance before I read your post and wound it counterclockwise using 0.050 mm wire 44awg I think about 6.2kt.

Cheers

Andrew

Also when SD use 0.050 mm wire in humbuckers - layout step in 1 layer. = 0.075 - 0.080 mm . Hope it will be helpful.

[the great waldo]

Also when SD use 0.050 mm wire in humbuckers - layout step in 1 layer. = 0.075 - 0.080 mm . Hope it will be helpful.

Hi Mr Candy

Thhanks for the note, I wound the coil by hand and it sounded fine. The info will come in usefull when I finally get Elepros cnc winder finished.

All the best

Andrew

[MrCandy]

Hand winding for beginners, video manual with some tips included.

You can control wire layout very easy when you HW too like CNCMAN(check link and watch video we think it will be useful)