4-conductor hookup wire question

[markeymark]

Im wiring a humbucker with a coil split.(I want the slug side hot in the split) What two wires do I run to the split? I'm using the standard Gibson wiring color code.

Hookup wire:
Red- slug start
Wht- slug end
grn-screw side finish
Black-screw start

According to Duncans website: (Seems wrong)

Grn and Wht go together into the on/on mini toggle.
Blk and drain to ground.
Red to the pot lug.

Thanks a ton!

Peace

Mark

[EtLa]

You want to cancel the slug side?

If you ground the green and white the slug side will be active

[markeymark]

I want the slug side hot in the split. So is the Duncan wiring diagram right?
Grn/wht to the middle lug of the on/on with the end lug of the on/on going to the ground?


Thanks
Peace

[EtLa]

but according to this:

Hookup wire:
Red- slug start
Wht- slug end
grn-screw side finish
Black-screw start


Grn and Wht go together into the on/on mini toggle.
Blk and drain to ground.
Red to the pot lug.

the slug side will be hot

[markeymark]

Thanks bro!

I owe you a beer.

I already had translated the SD color code to Gibson color code.

Thanks again

peace

[EtLa]

http://www.grolsch.com/

[markeymark]

You have great taste my friend.