New Polymer Neodium magnet VIDEO, standard pickup constructions tests and comparison

[salvarsan]

I do not need this calculator, we have an emulator winding machines for debugging process.
He reports
42 AWG - 90 NT
43 AWG - 105 NT
44 AWG - 114 NT
in a layer.

I wrote that calculator and I don't need it either.

I have simple arithmetic to calculate how many turns of .0027" OD wire can fit in one layer on a bobbin with .25" height.

[MrCandy]

I wrote that calculator and I don't need it either.

I have simple arithmetic to calculate how many turns of .0027" OD wire can fit in one layer on a bobbin with .25" height.

Theoretical calculations will be different from the actual winding. If you set the actual height machine reels,
you get the wrong form coils. I reported the data on the basis of the practical results of winding.

Congratulations to the entire community a Happy New Year

[David Schwab]

Congratulations to the entire community a Happy New Year [ATTACH=CONFIG]16674[/ATTACH]

Happy New Year to you and everyone else!

Let's all make a ton of money in 2012!

[David Schwab]

Here's my prototype blade Strat pickup using MrCandy's neo magnet.

I'm not sure when I'll get it into the guitar, but I'll try in the next few days.



[edit]

OK, here's what it sounds like:

http://www.sgd-lutherie.com/media/ne...eck_test_1.mp3

The guitar's not set up well, so it was hard to play!

This was the first try on the pickup, so now I have some tweaking to do. Not too bad.

Here is is distorted:

http://www.sgd-lutherie.com/media/bl..._distorted.mp3

[MrCandy]

Here's my prototype blade Strat pickup using MrCandy's neo magnet.

I'm not sure when I'll get it into the guitar, but I'll try in the next few days.

[ATTACH=CONFIG]16679[/ATTACH]

[edit]

OK, here's what it sounds like:

http://www.sgd-lutherie.com/media/ne...eck_test_1.mp3

The guitar's not set up well, so it was hard to play!

This was the first try on the pickup, so now I have some tweaking to do. Not too bad.

Here is is distorted:

http://www.sgd-lutherie.com/media/bl..._distorted.mp3

Good job David.
Low frequencies are hard, at high frequencies there are no artifacts.
A good prototype.

We experiment a bit, and recorded our PAF.
Blues Backer Br 2 channel Bells.mp3