I need Elepro gauss 3.0

[cenizasblancas]

Hi, i need to know if is posible to buy the elepro gaussmetter kit or someone can help my for buying the parts for building it (the board drawing, and the componets). I have already written to elepro but he said that he donīt sell it anymore (i think it not made any kit for now).

Regards

Juan Motta

[-Elepro-]

Juan, i never made kit... i sell pre-programmed PCBs and PICs (you need this IC with my software in it to build my gaussmeter).... other components are listed here

as i said in my private message, at this moment i do not have PCB... but i can get them if there are 4 or 5 persons interested

bye

[cenizasblancas]

forgiveness i had not understood, so if someone want this gaussmeter, please make your order here.

[Bryan Jeppson]

Just how complicated would this be to put together for someone like me whose experience in electronics is limited to wiring guitars? Would this be too complicated for a first project? I'm guessing it would, but it is the sort of thing I would love to have.

[David King]

Bryan, if you can solder through-lead components (the old fashioned ones) to a pcb (printed circuit board) you can assemble this kit, it probably takes all of 1/2 and hour not including the case which isn't 100% necessary. I'm still using my 2.0 gauss meter without anything around it though I'm sure I'll be ridiculed on here for saying that.

[Bryan Jeppson]

Count me in for one then. Does Radio Shack carry PCB?

[copperheadroads]

I'm still using my 2.0 gauss meter without anything around it though I'm sure I'll be ridiculed on here for saying that.

Shame on you David just kiddin

[chriswhite]

If you still have some, please count me in as well.

[willc]

I too would take a pcb if you are having a batch made.

[-Elepro-]

excuse me for late in reply...

I have not PCBs at this moment but i can order if there are at least 5 persons that want it....

bye

[zigmart]

Count me in, I would like one of these also

[David Schwab]

I would like one of those. My old one works fine, but it's nice to have a backup.

[David King]

I have one but i haven't picked up the components yet for mine as Mouser was always backordered on one thing or another. I hope we can get an updated BOM (bill of materials) together soon as well.

[zigmart]

Any word on if you are gonna be making more boards soon?

[peskywinnets]

Any word on if you are gonna be making more boards soon?

I knocked up my own steam punk gaussmeter the other day....took me 3 hours (most of that was making and populating the pcb)...it works just fine.

because I did't have a suitable display for the pcb ....I just connected the output of the small board I knocked up to my pc serial port (and then view the gauss/pole data onscreen.

these things area piece of p*ss to throw together......a 5v regulator, an allegro hall effect tranny ...a pic (to AtoD the allegro output and send data serially) - job done.

it looks terrible though!