Tweet
Could any of you guys tell me what tap to use in a telecaster bridge baseplate so that it'll take a standard screw? I has a suspicion it was 4BA but that somehow doesn't look right ... Help!
-
-
"If Hitler invaded Hell, I would make at least a favourable reference of the Devil in the House of Commons." Winston Churchill
Terry -
Thanks ... that sorts out the size ... sadly being in the UK, UNC screws are as rare as rocking horse droppings. Still I can tap the holes that's something!Originally posted by big_teee View PostComment
-
Nominal 6x32 screw.Originally posted by foonting View Post
.1312 inch = 3.33248 millimeters
M3.5 × 0.6|6g|3.479mm|3.354mm|
Standard External Metric Thread and Fastener Sizes M1.6 - M18 - Engineers Edge
Good Luck,
Terry"If Hitler invaded Hell, I would make at least a favourable reference of the Devil in the House of Commons." Winston Churchill
TerryComment
-
Comment