Tweet
Does anyone here know if the eyelets from Mojotone are the same size as those from Stewmac? From the pictures, they certainly don't look like the same length... I've got the setting tool from Stewmac, but since I'm ordering some other parts from Mojotone (and since the eyelets are cheaper there), I'm wondering if the setting tool will work with these.
-
-
I set the mojo eyelets all the time with a standard center punch.Originally posted by Chris Turner View Post
I don't own the set tool, never saw the need.
"If Hitler invaded Hell, I would make at least a favourable reference of the Devil in the House of Commons." Winston Churchill
Terry -
I've only used the Mojo eyelets already set into flatwork. They are not the same as the Stew Mac eyelets. The Mojo eyelets seem to go through the flatwork better, and are lower profile which stops them from being in the way. I think the SM setting tool should work.It would be possible to describe everything scientifically, but it would make no sense; it would be without meaning, as if you described a Beethoven symphony as a variation of wave pressure. — Albert Einstein
http://coneyislandguitars.com
www.soundcloud.com/davidravenmoonComment
-
Originally posted by David Schwab View Post
Ok, thanks guys. I'll assume they're long enough to go through the 0.093" flatwork.Comment
-
Yes they fit, and after seating they are flush with the flatwork.Originally posted by Chris Turner View Post
I like the eyelet on the bottom.
T"If Hitler invaded Hell, I would make at least a favourable reference of the Devil in the House of Commons." Winston Churchill
TerryComment
-
The Mojo eyelet has .083 diameter and is .110 tall including flange.
The flange has a .145 diameter and is about .012 thick.Comment
Comment