Stripped threads on a SC

[markeymark]

Whats the best fix for stripped threads in the forbon? (The holes for the mounting screws) I was going to use a little epoxy but thought I'd ask first.

Thanks

[corduroyew]

I don't have much experiace with this, but a few years ago I fixed the stripped holes with ebony dust and superglue. I filled the hole and redrilled and it worked fine.

[Spence]

If nobody is going to see it, fill the hole with ALSI12
and retap the thread when it's set. It can be drilled and tapped after 10 minutes.

http://www.parasolinc.com/Products.asp?ProductID=ALSI12

[markeymark]

Thanks again.

Peace