1018 steel polepieces

[marcfrom]

Hi,

I'm searching desperately for a good source of 1018 steel polepieces !

Some help?

Thanks

[buddha0709]

Hi,

I'm searching desperately for a good source of 1018 steel polepieces !

Some help?

Thanks

addictionfx on ebay has 1018 pole pieces in plated and non plated

[marcfrom]

Yes I have a 1018 from Addiction FX, my humbuckers sound very well with it but finishes are unrefined. Slots for screwdriver are too large and not well centered.

[big_teee]

If you don't like ADFX, there is MOJO.
I've heard That Montreaux has some good parts.
You might email them.
Guitar parts & Accessories?Montreux

[marcfrom]

Mojo is very well finishes but is 1022 steel. The humbs sound a little brighter.
I will send an Email to Montreux for more infos.

[marcfrom]

This this the answer from Montreux "Same as Gibson historic."

[marcfrom]

I had an answer from Mojo, their American slugs are 1018

[the great waldo]

Hi Marcfrom

Are you looking for slugs or pole screws? I must say I had some nice ones (optically speaking ) from Montreux some years ago, they also sent me some nice brass bobbin mounting screws.

Cheers

Andrew

I had an answer from Mojo, their American slugs are 1018

[marcfrom]

Hi Andrew,
I talking about pole screws.

Thanks for your proposition, about the 1018 pole screw but I will take it from Mojo it's very nice ones but I'm still looking for 1022 ones.

So if you have an idea...
Thanks

[the great waldo]

Hi Marcfrom

There you go Humbucker Pole Screws,1022 Alloy,100 pieces,Nickel Plated,Free shipping | eBay
Dennis has them at addiction fx.

Cheers

Andrew

Hi Andrew,
I talking about pole screws.

Thanks for your proposition, about the 1018 pole screw but I will take it from Mojo it's very nice ones but I'm still looking for 1022 ones.

So if you have an idea...
Thanks

[marcfrom]

Hi Marcfrom

There you go Humbucker Pole Screws,1022 Alloy,100 pieces,Nickel Plated,Free shipping | eBay
Dennis has them at addiction fx.

Cheers

Andrew

Thanks for your help Andrew but as you can read in this thread I have a pole screws from Addiction FX.

The pickups sound very well with it but my humbuckers sound very well with it but finishes are unrefined. Slots for screwdriver are not well centered.

[the great waldo]

Hi Marcfrom

You did say you had 1018 from Fx not 1022 The 1022 I got from fx look ok slots central, slightly rounded heads. The screws i've seen on Gibson humbuckers have been all over the place over the years. Unless your making fake pafs I do'nt think it's going to make a difference how they look, after all the sound should be the most important thing. I do'nt think you're going to find them from anywhere else.

Cheers

Andrew

Thanks for your help Andrew but as you can read in this thread I have a pole screws from Addiction FX.

The pickups sound very well with it but my humbuckers sound very well with it but finishes are unrefined. Slots for screwdriver are not well centered.

[marcfrom]

I have both From FX 1018 and 1022. Of course most important is the sound, I completely agree with that, but I just trying to improve my pickups as the best I can.

[the great waldo]

Hi Marcfrom

Perfectly understandable. Good luck on the hunt for the correct screws. I must say the screws I got from Montreux were visually very nice.

Cheers

Andrew

I have both From FX 1018 and 1022. Of course most important is the sound, I completely agree with that, but I just trying to improve my pickups as the best I can.

[marcfrom]

Ok but is it 1018 or 1022 ? I asked them but they doesn't know.