Tweet
Anyone have a quick source for the brass wood screws on the back of humbuckers? They are size 2 1/2 inch long, round head, PHILLIPS slot, BRASS.
-
http://www.SDpickups.com
Stephens Design Pickups -
You mean #2 round head wood screws, 1/2 inch long, phillips slot. I've found these at local hardware stores and Home Depot. I bet that Rockler also carries them. Is it necessary that they be phillips, or will a slotted head do? Also, I assume that non-magnetic is the issue, not brass per se, so stainless steel would be OK.Originally posted by Possum View Post
Home Depot carries suitable brass #2 wood screws in brass. McMaster-Carr has stainless steel #2 sheet-metal screw with Philips recess. McMaster-Carr also has brass wood screws, as does MSC. -
-
Hi Possum
I have some, how many do you need? I can help with a good many but not any great number. I don't remember where I got them from though, not sure if they are even what you may use. But glad to help if I can.Comment
-
found some...
Yeah Lowes Home Depot has them but they are slotted, not what I want, going for vintage correct as much as possible, thats just me. Does anyone have some vintage correct sweat of Duane Allman and beer drippings from Michael Bloomfield? I ran out last week and not sure what to do.....http://www.SDpickups.com
Stephens Design PickupsComment
-
-
here is one possible source. There are tons of sources for the round slotted heads but few for the phillips from what i found....go figure.
http://www.boltdepot.com/product.asp...8&cm=4&cd=1557Comment
-
Tacoma Screw has #2 round head brass wood screws with a slot head and you can order phillips head also. The bummer is the flat head shaft is closer to a vintage phillips screw than their new phillips wood screw. But the phillips screw is not way off.Comment
-
Stewmac has them.Comment
Comment