Dimebucker INFO NEEDED

[TeleUser]

Hey everyone,

A friend of mine was poking around his dimebucker and he managed to break one of the bobbins... I'm fixing this for him but i was wondering if anyone here knows what gauge wire this use? I'm guessing a 43 awg but maybe it's 44awg.

Any info kindly appreciated.

Thanks
Jack

[big_teee]

With a pickup DCR of 16.5, most likely it is 44sp wire.
If the bobbin dimensions are similar to a Gibson Dirty Fingers?
Probably 7000-7200 turns of 44SP, will get you close.
GL,
T

[copperheadroads]

Duncan does a bunch of pickups in that same 16.4k range that uses 44 gauge wire ..I agree With Terry .

[TeleUser]

Thanks for your input guys... I'll give it a go on 44awg.