low z pickups

[surdopickups]

Ciao a tutti.
Chiedo un aiuto.
Come realizzare un circuito volume e tono su un pickups a bassissima impedenza?
Quali valori di potenziamento e quale condensatore usare?
Impendenza pickups 400 ohms
Grazie a tutti

[surdopickups]

I ask for help.
Do you come up with a volume and tone circuit on a pickup of a very low impedance?
Which enhancement values and what capacitor do you use?
400 ohm impedance pickups.
Thank you all

[J M Fahey]

400 ohm impedance or resistance? Not the same.

If impedance, forget it.
Send low impedance output straight to amplifier and use amp own controls, *or* add an active circuit inside your instrument, then you can do anything you wish.

If resistance, impedance might easily be 10X that, so weŽd be talking around 10k pots and you should try different value caps until by ear you find what you like.
Again you might go active.

[surdopickups]

400 ohm impedance or resistance? Not the same.

If impedance, forget it.
Send low impedance output straight to amplifier and use amp own controls, *or* add an active circuit inside your instrument, then you can do anything you wish.

If resistance, impedance might easily be 10X that, so weŽd be talking around 10k pots and you should try different value caps until by ear you find what you like.
Again you might go active.

thank you very much.