Flat Pole Strat Magnet Length

[PoorMan]

Haven't wound pickups in a long time and when I did a was almost exclusively humbuckers. I am piecing together a Strat for myself and am going to wind some flush pole pickups. What is that typical magnet length of most modern flat pole Strat pickups?

The only info I could find is conflicting. Both supposedly measurements of "70s" Fender pickups:
Seymour Duncan says .656"
StewMac says .671"

If anyone happens to have a flat pole Duncan lying around and can measure it, that would serve my needs.

Thanks in advance,
Dave

[big_teee]

This might help!
Depending how tall you want them, and how much sticking out the top.
https://music-electronics-forum.com/...0&d=1526741704