Broadcaster Pickup ?

[Electricdaveyboy]

One of my customers wants me to build a broadcaster pickup set for him.
He told me to wind it : Clockwise and Polarity on top North with 43 awg PE.
My question:
Wehn I look on to the eylets from the top of the pickup to wich eyelet will I have to conect the starting magnetwire?
Is it the left or the right eyelet?

thanks
david

[Spence]

LEFT

[Sam Lee Guy]

AAhh Blordcaster pickups! Smaller than normal Terecaster pickup in bridge. Both north up but wound anti-crockwise, top right, top going. Spence right, looking at top, with eyelets upwards, start with left eyelet, 43 PE. Earliest pickup have 1.6mm top and bottom for both pickups.

[Possum]

........

If you live in the southern hemisphere you will need to reverse all the directions given....

[Electricdaveyboy]

Thanks !

Thanks Spence Sam Lee and Possum !

My customer is reading in the Blackguard Book and so he told me what he had read there was : Wound clockwise.

How small are the Broadcaster pups - Are the later Telecasterpickups taller?
Magnet lenght chaned ?

Watch out for the sheepdog!

cheers
david

[David Schwab]

My customer is reading in the Blackguard Book and so he told me what he had read there was : Wound clockwise.

Won't make a whiff of difference in the tone of the pickup.

[Sam Lee Guy]

just measured a couple of old pickups, Blordcaster blidge pickup fiber base average, 73.2mm long. Same height etc...

[Electricdaveyboy]

Thanks Mr. Sam Lee ,thanks Dave.
Made two bridgepickups one CCW and the other Cw.
Hope his ears will like one of them.
best
david

[gilligan]

?????

If the winding machine is turning clockwise, isn't the wire going on the bobbin counter-clockwise? Does "wound clockwise" mean the winder was turning clockwise? Or does it depend on how you wire it?
Ron