Ad Widget

Collapse

Announcement

Collapse
No announcement yet.

Cast magnets

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Cast magnets

    Most of the Alnico magnets I've bought or pulled out of other pickups had that 'brushed' look and were fairly shiny (maybe a 'metallic matte' might be a better description). In any case, they all looked about the same.

    In experimenting with swapping magnets, I pulled the A5 magnets out of the original Burstbucker Pros that were in my 2003 LP Std. and they were different. The 'flat' sides were black...not metallic looking. The edges looked about the same as the other Alnico magnets. The magnets were slightly different dimensions; slightly shorter length and either slightly wider or taller (can't remember) or possibly both. But the length was definitely slightly shorter. These magnets also seemed to be have a stronger magnetic strength.

    In comparing these magnets with some A5 pulls out of a couple of DiMarzios; when installed in the same p'up the Gibson mags had extended highs and lows and a more scooped sound. Both DiMarzio magnets looked identical and were allegedly A5, they came out of a PAF Pro and a Humbucker From Hell.

    Are these Gibson magnets cast? Where (other than Gibson) can I get some of these magnets? I ask because some overwound p'ups, like a Duncan Custom 5, seem to be kind of middy and compressed/congested and they already use A5. I wanted to try these 'black' magnets in these type p'up to see if it opens them up a bit.

    PS - I fairly certain these magnets are not ceramic, I have some ceramic pulls and these are different. Besides, Burstbucker Pros are advertised as Alnico 5 and these were stock in a brand new LP.

  • #2
    Sounds like you've got some cast, rather than sintered A5 magnets that have only been ground on the ends and magnet faces. Old PAF magnets used to have that finish and were sand cast.
    sigpic Dyed in the wool

    Comment


    • #3
      probably not.....

      it may be alnico 4, just a guess, yes its cast. there currently is no one I know who makes them that way anymore. I know the supplier that made those and I have a couple of them they gave me, its not economical to make them cast as they have to be made one by one rather than cast as a big block and then magnets cut out of that. Duncan used to use this supplier here in america now they get all their magnets from china.....
      http://www.SDpickups.com
      Stephens Design Pickups

      Comment


      • #4
        Originally posted by Possum View Post
        it may be alnico 4, just a guess, yes its cast. there currently is no one I know who makes them that way anymore. I know the supplier that made those and I have a couple of them they gave me, its not economical to make them cast as they have to be made one by one rather than cast as a big block and then magnets cut out of that. Duncan used to use this supplier here in america now they get all their magnets from china.....
        Hi Possum, as in posts at the other board I am still with you on the magnets creating a unique tone. I still beleive the Old PAF's tone had something to do with the magnets. Now I really want some cast mags to test with.

        Comment


        • #5
          maybe....

          the secret in PAFs I think now, isn't in the magnets. Cast magnets can be slightly brighter, but thats not the sole piece that makes PAFs sound good, you have to have all the correct parts in the correct dimensions, and correct alloys. To do that you have to have them made, as no one sells these parts in correct specs. Alot of it is somewhat close but put together as a whole they miss the mark. You can get that PAF tone pretty close but you have to do things a bit different than was done in the originals to compensate for not having the parts they did. And really, PAF tones arent' all THAT magical really. Alot of them were muddy and blah sounding, the good ones were probably not that numerous. Here's a good link to the only video I've ever been able to find of Duan Allman playing his guitar:
          http://free-the-music.blogspot.com/2...ideo-from.html
          Nice tone but not anything that can't be duplicated with alot of testing and experimentation.
          http://www.SDpickups.com
          Stephens Design Pickups

          Comment


          • #6
            There's a few key things going on with that tone. It 's clear that he sets up his amp for the neck pickup rather than the bridge. He's also playing through a huge rig and is clearly stoned.
            Thanks for the link to the clips though; clips like that are like rocking horse shit; hard to come by.
            sigpic Dyed in the wool

            Comment


            • #7
              Awesome playing!
              I just don't dig his slide playing (I know, sacrilege), but he had great tone and taste.
              Definetively favored the neck tone over the bridge...but what a nice tone!
              Any idea of what amps was he using at the time?

              Comment


              • #8
                Duhwayne....

                I think he was using a 50 watt marshall cranked all the way, there's info on the net about his amps. Yes, to get that tone you gotta smoke a big spliff :-)

                Also notice the covers were taken off the pickups, and yeah bridge and neck are different, thats always a problem to me, the bridge pickups if made the same way don't match the neck real well. He does use the bridge a fair amount, I think from what I read he also used the middle position alot but used the volume pots to mix that tone as well. You may not like his slide playing but realize this was 1971, by those standards in that day he was considered spectacular. Derek Trucks took that style off the planet! I'm not an Allman fan and never was, I've been looking alot for PAF historic tones from guys who didn't mess with their guitars like Page did with the elctronics, and no effects. Bozz Skaggs did a song called Buddy Loan Me A Dime with Duan playing lead, and that tone just floors me everytime I hear it, have no idea which pickup, what amp which guitar etc. Best PAF tone I ever heard.
                http://www.SDpickups.com
                Stephens Design Pickups

                Comment


                • #9
                  Yeah, the big difference in tone between bridge and neck in some LPs really put me off, and almost everytime this happens is because both PUs are identical (or very close). I prefer a little overwound bridge PU in LPs, but that's also sacrilege for some guys.
                  I get your point about his rating as a player back in those days. It's not his phrasing I have a problem with but his tuning instead. I find George Harrison a far more in-tune and very underated slide player.
                  BTW, couldn't agree with you more about Derek Trucks.
                  Wow, I'm not a Junior Member anymore!

                  Comment


                  • #10
                    Couple of comments:
                    Maybe it was just bad luck but one of the two cast magnets I pulled from the BB Pros snapped in half. So it may be that they are more brittle?

                    IMO, the BB Pros are way too 'hifi' sounding. They have a cool, unique tone especially when played clean but I didn't really like them when overdriven. Lots of lows and highs but the mids aren't right. I put one of the magnets in a way overwound PAF-type (I think, it's a WCR Goodwood bridge p'up) and it's still a bit too scooped.

                    I too struggle with the LP bridge/neck thing. I really believe if the neck p'up were placed farther back towards the bridge it would help them balance. I can't get them to balance unless I go hot on the bridge and really cool on the neck.

                    Like a lot of artists of the day, drugs really held a few artists back. You can hear certain recordings of Duane and he sounds and plays great...other times not so much. I recently noticed that many of the later Hendrix recordings had some really sloppy playing and poor singing but much of the earlier stuff (often in black & white, when he had the moppy fro) is cleaner and more polished...like this one.

                    Comment


                    • #11
                      Originally posted by Possum View Post
                      Also notice the covers were taken off the pickups
                      If you look carefully, it looks like the covers are on the pickups.

                      Here's two other pictures of him. The first looks as if it's from the same concert.





                      I agree about the tone... what is a PAF tone exactly? His guitar doesn't sound that much different from the '81 LP Standard I used to own... once you get a good amp tone, you are set.
                      It would be possible to describe everything scientifically, but it would make no sense; it would be without meaning, as if you described a Beethoven symphony as a variation of wave pressure. — Albert Einstein


                      http://coneyislandguitars.com
                      www.soundcloud.com/davidravenmoon

                      Comment


                      • #12
                        Placing the neck PU further towards the bridge would give it a different tone than the one we are used to. It would sense a different part of the string and so different harmonics.
                        What works for me is a conventional PAF-style PU at the neck and an overwound version of that at the bridge. But as I said before, some hardcore vintage buffs won't have it that way.
                        David's got a point there, you can get really close to that tone with quite a few of the PAF copies that flood the market, meaning no disrespect to the fine builders in this forum, just my opinion. After all, you guys know more about this stuff than I do.

                        Comment


                        • #13
                          wow you're right....

                          yeah the covers were ON that guitar, huh, coulda sworn they were off. That guitar must have had the lower wind PAFs rather than the hotter 8K+ ones. The Les Paul forum has a guitar registry with pix of a bunch of LPs and some have DCR specs there, they range from just over 7K to almost 9K on some. I imagine the 9K ones probably sound pretty mushy.
                          http://www.SDpickups.com
                          Stephens Design Pickups

                          Comment


                          • #14
                            fragile mags

                            it broke because its porous, its like a sponge instead of solid like the perfect made ones we all buy.

                            One comment on some bad recordings by Duane, you know they are just human these star guitar players, some of them rarely make mistakes but some incredible talents like Hendrix weren't very consistent. If you read his latest biography, he showed up at alot of gigs with zero sleep, all that travel, and yes partying, wears you down. Just being on the road wears you down. Duane Allman was a good guitar player, but not really a great talent in my opinion like Hendrix or Charley Christian, the really good guitar players these days alot of them practice relentlessly, Hendrix did that alot in the beginning, he even practiced in the car on the way to a gig and at breaks during the gig. I like it when you see one of your heroes have a bad day, makes them more human to me, and then you can see them at their base playing abilities which is more understandable sometimes :-)
                            http://www.SDpickups.com
                            Stephens Design Pickups

                            Comment


                            • #15
                              FWIW - I just read that Fralin and RS Guitarworks are jointly selling a PAF-clone and LF is using cast A4 magnets (individually tested for a few properties...then cryogenically treated). So if true...it would appear cast magnets are available, just wish I could find where to get them.

                              Comment

                              Working...
                              X