Mojotone Pickup Parts

[Possum]

...

Mini humbucker parts would be great but are they WSC the same as Guitar Jones? I think those covers are brass.

If you're asking about bucker baseplates, definitely nickel silver NO brass. Get hold of a vintage Gibson baseplate and copy. NO extra holes please. StewMac's are real good but would be nice to have another source, maybe better price too.

Yes nickel silver P90 covers would be really cool. I'm pretty sure they exist.

[RedHouse]

Nickel silver Strat covers! you'd be the only one on the block with them.

[Electricdaveyboy]

P -90 humbucker covers

I used the closed humbucker covers made from nickle silver and got the holes stamped in here.It works but I would perfer ready machined P-94 covers.

[jaydawg]

I'll give another vote for A3 rods.

[kevinT]

Here is another vote for the Humbucker-sized P-90 covers in Nickel Silver....Nickel plated, Gold plated, and raw nickel (unplated)....would be nice

[zparts]

Thank you all for your replies. I will try look into some of this. Humbucker sized P-90 nickel-silver covers and mini humbucker parts seem most likely at this point. A3 in .630 and .688 too. I will let you know and it may take a while. Right now I am going home to Wilmington and ride some storms out. Wish everyone one the east coast the best of luck! We all might need it depending on what Hanna and Ike decide to do. Thanks again.

Regards,

David Shepherd

[NightWinder]

Thank you all for your replies. I will try look into some of this. Humbucker sized P-90 nickel-silver covers and mini humbucker parts seem most likely at this point. A3 in .630 and .688 too. I will let you know and it may take a while. Right now I am going home to Wilmington and ride some storms out. Wish everyone one the east coast the best of luck! We all might need it depending on what Hanna and Ike decide to do. Thanks again.

Regards,

David Shepherd

Hanna and Ike could kiss and make up : ) Good luck man...

[Spence]

Thank you all for your replies. I will try look into some of this. Humbucker sized P-90 nickel-silver covers and mini humbucker parts seem most likely at this point. A3 in .630 and .688 too. I will let you know and it may take a while. Right now I am going home to Wilmington and ride some storms out. Wish everyone one the east coast the best of luck! We all might need it depending on what Hanna and Ike decide to do. Thanks again.

Regards,

David Shepherd

Wilmington, Delaware? I used to live there. Happy days back in the 70's.

[PoorMan]

Lipstick parts would be cool.

[salvarsan]

(...home to Wilmington) Regards,
David Shepherd

Wilmington, Delaware? I used to live there. Happy days back in the 70's.

It occurs to me that zpart is a Shephard.
Are you making nice with him just to get at his sheep?

-drh

[zparts]

Wilmington North Carolina. Port City/Cape Fear. Hurricane alley.

David

[Stan H]

Wilmington North Carolina. Port City/Cape Fear. Hurricane alley.

David

I'll keep my fingers crossed for you if you do the same for me. I'm in South Florida...the OTHER hurricane alley. We're still drying out from Fay and got drenched again today by Hanna but neither one was as bad as what is coming next (Ike)!

[zparts]

I'll keep my fingers crossed for you if you do the same for me. I'm in South Florida...the OTHER hurricane alley. We're still drying out from Fay and got drenched again today by Hanna but neither one was as bad as what is coming next (Ike)!

Absolutely brother. You guys have been getting your fair share this past hurricane cycle. We can all hope these storms take a turn out to sea.

David

[Zhangliqun]

I'd like some Phat Cat/Rio Grande Bastard style covers in nickel, gold, and -- get this -- black and cream. And another vote for nickel silver minihum covers, in nickel or chrome, and gold. Oh, and don't forget some LP Deluxe style mini-hum pole pieces in nickel and gold.

[LtKojak]

Haeussel p'ups... where does he get his parts?

I would perfer ready machined P-94 covers.

Speaking of which... hey, you're german; do you by any chance know WHERE that Haeussel guy gets all those beautiful (and exotic) parts to build his p'ups? Or he just MAKE'EM by hand?

Looks like this guy can do just 'bout ANYTHING! And he and his products' got quite a good rep here in Italy... most (if not all) of the small custom order guitar makers around here are using his products.