Show Your Stuff

[big_teee]

We need a Thread, for showing some of the stuff we make.
Everyone has different levels of Craftsmanship, so please keep comments positive.
Everyone beginner, Hobbier, and Pro is welcome to post your pickups or guitars with pickups here.
Here's a couple of my Beater imports I made Pickups for.
The Red Guitar has a 7.2k Neck Bucker with Black hardware.
The bridge is a hybrid 43 Ga Blade Bobbin, and 42 Ga Screw Bobbin, it is 13.5k, with black hardware.
The Amber Double Cut is a 7.3k Neck W/Nickel cover.
The bridge is a 9.3k Nickel Cover P/U.
Now I would like to see what you made!
BTW, Yes I am Left Handed.

Rock On!
Terry

[mickmutante]

Cool thread...
This is my most recent work, I published it in some forums...
Umbucker: Neo magnets, with 42AWG with radiused blade.
Jazz: Neo magnets, with 42AWG with radiused blade.
Ebony covers.
(I cannot find where I wrote the specs of the pickups.)

[big_teee]

Cool thread...
This is my most recent work, I published it in some forums...
Umbucker: Neo magnets, with 42AWG with radiused blade.
Jazz: Neo magnets, with 42AWG with radiused blade.
Ebony covers.
(I cannot find where I wrote the specs of the pickups.)
[ATTACH=CONFIG]14440[/ATTACH][ATTACH=CONFIG]14441[/ATTACH][ATTACH=CONFIG]14442[/ATTACH]

Very nice Work.
I'm sure Your Very Proud!
T