Tension and DCR question

[Danelectron]

Is "trasverse time" the time that I take to move my hand for one side to another? And so If I move my hand slowly, have a TPL more high? Is it right?

Yes. With a perfect coil the windings will lay flat, one next to the other with no overlap. When they cross over eachother, that is scatter.

[Marco78]

Yes. With a perfect coil the windings will lay flat, one next to the other with no overlap. When they cross over eachother, that is scatter.

Do you have experimented with different "hand trasverse time"? Is the difference on sound audible?

[Danelectron]

Is the difference on sound audible?

Yes.

[Marco78]

What are the differences? I think that with "flat" coil the sound is more dark and middy and with scatter is more airy? It is right?

[Marco78]

The TPL is Turns per Layer.
If you have 200 TPL, then you would have Less Layers for the Same DCR, compared to 160 TPL
Coil Estimator
If you will experiment with the Coil Estimator above, you can see the Difference in Changing the TPL.
Feel free to ask Questions, and I will try to help get past the Lanquage Barrier.
Good Luck,
Terry

I don't understand how works this coil estimator. If I can only chose type of pickups and gauge and is automatically give me a resistance in ohm that I can't choose.

Ie. I insert 50mm paf in bobbin style and 42 in Wire awg and single in insulation build and the calculatore give me a DCR of 3,7. How can I do if I would to know the turns for a different DCR?

Thanks

[big_teee]

I don't understand how works this coil estimator. If I can only chose type of pickups and gauge and is automatically give me a resistance in ohm that I can't choose.

Ie. I insert 50mm paf in bobbin style and 42 in Wire awg and single in insulation build and the calculatore give me a DCR of 3,7. How can I do if I would to know the turns for a different DCR?

Thanks

Bobbin Style
Wire AWG#
Insulation build
Resistance ENTER Ω →
You select all of the above.
You type in the Resistance Value that you want, then you select the Calculate Winds Tab.
That will change everything for that resistance value.
Try that.
Terry

[Marco78]

Bobbin Style
Wire AWG#
Insulation build
Resistance ENTER Ω →
You select all of the above.
You type in the Resistance Value that you want, then you select the Calculate Winds Tab.
That will change everything for that resistance value.
Try that.
Terry

Now work!

A question: if I insert 8000 ohm in paf style pickups, does the estimator give me the total turn or the turn for one bobbin?

Thanks!!

[big_teee]

Now work!

A question: if I insert 8000 ohm in paf style pickups, does the estimator give me the total turn or the turn for one bobbin?

Thanks!!

The estimator is just calculating for one Bobbin.
That is just half of the pickup.
T

[Marco78]

ok tnx