First set of pups for a friend

[Robbinst]

I finished the humbuckers today! They look good and I'm hoping they sound decent also. I just have to wait for my customer to email me back about delivering them. I will let you guys know what he thinks as soon as he gets to test them out but for now here is some pics!






The box could be better quality but it gets the job done, I'll make it better next time.

[copperheadroads]

I finished the humbuckers today! They look good and I'm hoping they sound decent also. I just have to wait for my customer to email me back about delivering them. I will let you guys know what he thinks as soon as he gets to test them out but for now here is some pics!






The box could be better quality but it gets the job done, I'll make it better next time.

Nice ............Very Elegant & good job .
Did you use longer slugs? just wondering ,seeing them sticking up a bit higher than usual

[copperheadroads]

Just curious do most of you make your own guitars as well, or just the pickups for them?

http://music-electronics-forum.com/t27221/

A 16k bridge pup & a 6.6k neck ?

[Robbinst]

Hey guys its been awhile but my customer finally got a sound clip of the bridge bucker I wound for him. He is very happy with it. Just thought Id share the vid and see if any one had any constructive criticism on it. This is the 16.6k humbucker wound with 44awg wire, ceramic mag, nickle plate, and blood wood spacer (didn't have plastic ones left). Warning: he is a metal head, Let me know what you think.

[big_teee]

Sounds Hot.
Lots of drive.
I can tell it has the ceramic magnets, and it is high output.
It has that bright high attack that metal players like.
The important thing is that the customer likes it.
Another option you may want to try, is a A8 Magnet.
It has the same output as the C8, but a little warmer sounding.
Thanks for Sharing, jump in anytime.
Good Luck,
Terry