Tweet
Can you post a picture of the pickup.
Also make sure you check that the magnets are fully charged.
T
Also make sure you check that the magnets are fully charged.
T
-
"If Hitler invaded Hell, I would make at least a favourable reference of the Devil in the House of Commons." Winston Churchill
Terry -
P-90 are a true workhorse & it's kind of hard to get any but normal sound from them .But an output problem !!! ,I agree with Terry either magnets are not opposed or not charged properly ."UP here in the Canada we shoot things we don't understand"Comment
-
Okay so it turns out I'm an idiot... I took off the pickguard, checked the pickups and everything seemed to be as it should. I was taking pictures when I noticed that a small part of the 3 way blade toggle switch was making contact with the conductive shielding paint on the cavity.
I tested it with some electrical tape and the volume of both pickups jumped to where I thought they should have been. Thanks of all the help!
Comment
-
Glad you fixed it.
Don't be too hard on yourself.
All problems seem simple after you find them!
Welcome to the forum.
T"If Hitler invaded Hell, I would make at least a favourable reference of the Devil in the House of Commons." Winston Churchill
TerryComment
Comment