Where to find a closed Nickel silver Tele pickup covers.

[marcfrom]

Hi guys,

The question is in the title.

I'm looking for a closed Nickel silver Tele pickup covers. The ones from Stewmac are in copper material.

I use the nickel silver from Mojo, but it's open.

Does anyone can help me?

Thanks

Marc

[David Schwab]

Hi guys,

The question is in the title.

I'm looking for a closed Nickel silver Tele pickup covers. The ones from Stewmac are in copper material.

I use the nickel silver from Mojo, but it's open.

Does anyone can help me?

Thanks

Marc

[ATTACH=CONFIG]20128[/ATTACH]

The ones from Mojo are closed on the top like regular Tele covers.

Mojo Pickup Parts » Mojotone Nickel Silver Tele Neck Pickup Cover Bare



Mojo Pickup Parts » Mojotone Nickel Silver Tele Neck Pickup Cover Chrome

[marcfrom]

I already have both Mojo. bare and chrome.

As you can see on this pics, it's mojo cover over the Mojo Alnico 3 assembled bobbin. The cover is too short, open on the sides. the legs are very difficult to bend.


I would like something like this one but in Nickel silver. It's more adapted (about legs) and has a more vintage look.
i see some pickup makers propose it, but i don't know where to find it.

[copperheadroads]

Hi guys,

The ones from Stewmac are in copper material.


[ATTACH=CONFIG]20128[/ATTACH]

All plated covers will have the thin copper flashcoat under the plating
& the Stew Mac covers are brass

[marcfrom]

Yes it's for this reason i want to find covers with the same form than Stewmac covers (completely closed), but in Nickel silver material not in brass.
No problems about the copper flashcoat.

[marcfrom]

I found this one , it's noted as Nickel silver. Does anyone already tried it?

TELE FRONT PICKUP COVER CHROME

[David Schwab]

The cover is too short, open on the sides. the legs are very difficult to bend.

Of I thought you meant open on the top.

[tomatmojotone]

We are working on some new suppliers for these covers. The samples they have sent me have the full draw on the sides with a 1/16" gap on the front for the winding wire.
They should be in stock in a few months.

[marcfrom]

Very good.

Thank you.

[RedHouse]

We are working on some new suppliers for these covers. The samples they have sent me have the full draw on the sides with a 1/16" gap on the front for the winding wire.
They should be in stock in a few months.

While you're at it, can you get them to draw some decent (nickel) covers for Strat?
(with and w/o holes)

[tomatmojotone]

I will certainly ask if it's possible.

[David Schwab]

While you're at it, can you get them to draw some decent (nickel) covers for Strat?
(with and w/o holes)

That would be great. I like the look of the Lace Chrome Domes.

I put one in the neck of this Tele. It looks like a Tele neck pickup, but it's Strat sized.