No announcement yet.

New Winder

  • Filter
  • Time
  • Show
Clear All
new posts

  • New Winder

    Wanted to share new winder setup that's been a couple weeks in the works and about which I was asking questions here about speed control options for a DC motor. it is.

    Click image for larger version

Name:	IMG_20150812_123901.jpg
Views:	1
Size:	2.99 MB
ID:	869833

    It's a Penpal pen making lathe. Variable speed motor with a no-load rpm of 4k.

    Click image for larger version

Name:	IMG_20150812_123909.jpg
Views:	1
Size:	480.8 KB
ID:	869834

    On the left side I wired in a dpdt switch to reverse the motor rotation. The stereo jack is wired to the internal control pot and connects via any old cable to a gutted wah pedal so the speed is fully foot controllable.

    And here's my favorite part. This is a straight Fred Stuart idea rip-off but is really as good as it gets for all the obvious reasons.

    Click image for larger version

Name:	IMG_20150812_123852.jpg
Views:	1
Size:	2.95 MB
ID:	869835

    The counter is wired to an optical sensor that's triggered by one of those clear cd's that come on the top and bottom of cdr/dvdrs packages. Enlarge the hole and tape one half of it with black tape. It counts turns accurately at whatever speed the motor is turning with everything assembled.

    Next step is to get someone who does CNC work to make a set of acrylic discs for me that are more precise than what I could do with a hand router. But, even with just a hand router, this is an awesome setup.
    Last edited by jrdamien; 08-12-2015, 05:56 PM.
bostanci escort
sisli escort mecidiyekoy escort
pendik escort
sex vidio
altyazili porno
antalya escort
beylikduzu eskort bayan eskort bayan escort antalya sirinevler bayan escort
gaziantep escort gaziantep escort
atasehir escort
antalya escort bayan escort atakoy
izmit escort
ankara escort
replica watches