Assymetrical correction (?) waveform

[Helmholtz]

Q101 is not a signal or current limiter transistor of any kind but just the Bias one...........

Yes, meanwhile I see.
Thanks for correction/explanations.
(I got the designations of Q101/102 wrong from the schematic.)

SS amps certainly don't belong to my core competences.

[g1]

SS amps certainly don't belong to my core competences.

I thought I recalled you mentioning this before, but you seem to be getting along fine here.

[J M Fahey]

(I got the designations of Q101/102 wrong from the schematic.).

Me too, still not so sure today, since labeling for both is superimposed and confusing.

Had to mentally "flip a coin" and pick one.

Called left one Q101 and right one Q102 but it might be the other way.

Oh well.

[g1]

Me too, still not so sure today, since labeling for both is superimposed and confusing.

Had to mentally "flip a coin" and pick one.

Called left one Q101 and right one Q102 but it might be the other way.

Oh well.

Yes, Q101 is on the left. Have followed the traces and the labeling on the circuit board. And it is mounted on the heatsink, where Q102 is not.

[Familyortiz]

Asymmetrical clipping. D301 or D302 bad?