Gallien Krueger Speaker Grill Removal

[Mars Amp Repair]

Hello folks,
This may be a silly post, but this seemingly simple task kinda threw me for an initial loop.
See pix attached.
You can tell that the grill board is attached with Velcro, but all the prying at the corners or anywhere gives you the impression that you're going to break or at least deface the amp.
I tried to get a hook behind the grill board and I could see I'd probably just break my hook.
THEN, I decided to see if there were any hidden screws underneath the unit, and low & behold.
There were 2 holes that I could see the edge of the speaker grill board thru. SO, you just take a small screw driver in there a wedge the grill board loose from the grill cloth.
So anyway, there ya go!
Glen

[Jazz P Bass]

Thanks for the info, Glenn.

[Mick Bailey]

Thanks, that could save someone a damaged cabinet.

I've lost count over the years the number of times I've regretted the way I took something apart where there was no previous reference. I've just dismantled a 70s calculator to repair. Two screws and no way of telling how the rest was assembled. By the time I'd got it apart some of the fiendish internal clips had broken, which could have been avoided had I known how it was assembled.