Digitech RP2000 Power Problem

[shawn_michaud]

Hey i own a Digitech Rp2000 . One night i left it plugged in (no On off Swith). Now when i connect the power chord nothing happens. Does not turn on . no lights nothing. Help?

Shawn

[52 Bill]

...Does not turn on . no lights nothing.

Dead Power supply? If you have a meter check it for output voltage. I think the old ones were fused inside the case.

[shawn_michaud]

Yah ill try testing the power supply. Thanks ill add another reply after that. Thanks alot. Oh yah and does the pedal have a fuse?>

[boog]

I have a rp2000 and I did the same thing.
There is no fuse in the pedal itself.
There is a fuse in the power supply, its a pain to get apart though.
I ended up breaking mine open to replace the fuse and taped it back together.
Now I plug my amp and pedal into a power strip and flip the switch on it so I don't kill anything again.

[shawn_michaud]

THAKS YOU SOO much Boog, Everything worked perfectly! Your a saint man. Thanks alot! Rock On

[shawn_michaud]

Hey the peadal is working fine but the expression pedal is not wortking i tryed to do a factory reset thern callibrate the pedal i push up and push down with the buttons but it says error i dont think the pedals tab is working when shone on the light any ideas?

[shawn_michaud]

hey sorry guys i did it backwards it works now