Hi, I have a yorkville ys-115 loudspeaker and want to be sure if polarity of horn is correct. In the attached image, I'm unclear why the positive side of the horn is connected to the negative side of the circuit board. When i put to continuity test from the input jack: i have continuity between neg of jack and where it's labelled horn (+) and woofer (-); and pos of jack to the woofer (+) and I don't get continuity on jack to connection labelled horn (-). I also put a low voltage across jack and tested connections for pos voltage corresponding to the way connections are wired to speaker. It was positive on woofer side and turned up negative on horn side. Which is making me think it's miswired and needs to be reversed but the matching cabinet I have is also wired this way. Maybe this is connected properly and just looking to understand why it's wired like this.
thanks for the assistance,
Sean
thanks for the assistance,
Sean
Comment