Gutshot of EHX Polyphase?

[Mark Hammer]

A buddy brought one over for repair this week, along with a bunch of other vintage EHX pedals. The power supply appears to have suffered some kind of melt-down and everything in that corner of the board is charred beyond recognition. Given that the components don't have dental records, and I'm a little too pressed for time to do the detective work using the schematic. I'd rather just knoiw what goes where and do a quick replacement. I've been able to find pics online of the copper side but not the component side. I was hoping someone might be able to point me to a gutshot of the board on the component side.

This is the non-reissue unit: 5-knobs, black and blue graphics, through-hole components, old folded-steel chassis.

[Mark Hammer]

Still can't find a gutshot, so here's mine. Perhaps one of you fine folks might be able to tell me what goes where component #1 used to be, before things went up in a thermal mess, and what component #2 is.

[Enzo]

It's uh... well if I just TELL you, how will you ever learn anything? Kids these days...

[MarkusBass]

Will this help?



It seems that this is part of the power supply - at the bottom of the schematic.

Mark

[Mark Hammer]

Thanks to all. Someone sent me a gutshot of that corner of the board. It,s not the clearest i the world, but the colour stripes visible identify the missing components as resistors, and will allow me to narrow down what resistors they could be.