I have two replacement transistors MJE205 and TIP42g. Like a dummy I didn't take pictures of the way it was before removing so now I don't know which one goes where. 3 wires for each transistor
-
What voltage should I get at Vc and V in the power amp section?
off the bridge its showing 34v +- Schem shows 48 Still should get some sound I'd imagine even if voltage is low.
On the left side of one of the pics are 3 wires
white -1.15v
brown -33.76
Green 18.50
Right side
white 1.01
brown +34.12
green 19.60
I just don't know which wires goto B C or E
Thanks for any help
nosaj
G10,G20,G30-1.pdf
-
What voltage should I get at Vc and V in the power amp section?
off the bridge its showing 34v +- Schem shows 48 Still should get some sound I'd imagine even if voltage is low.
On the left side of one of the pics are 3 wires
white -1.15v
brown -33.76
Green 18.50
Right side
white 1.01
brown +34.12
green 19.60
I just don't know which wires goto B C or E
Thanks for any help
nosaj
G10,G20,G30-1.pdf
Comment