Casio Privia PX-320 parts

[01redcobra]

Anyone out there know where I might find parts for this Casio keyboard PX-320? I am looking for the volume control board and cable assy #M408-CNB3 C. Thanks

[soundguruman]

Authorized Service and Support-Service Centers-Musical Instruments
The idea is to make you order the service manual first.
Then you look up the pieces, then order the actual parts.

[01redcobra]

I've pulled the pot off the board to test and it is bad. I could get the complete board and cable assy., but that's about $60 plus shipping. I'm trying to find a pot, but it's being a tough search. It appears to be an Alpha. I'm going to attach photos in hopes that someone can help me. It's apparently a linear taper 5K from the numbers on the base. The 5 pin configuration is making it a search for a hen's tooth. Korg has something similar, but that's a 10k and I'm not sure if the dimensions are the same. It measures roughly 9mm x 12mm and 5.5mm thick at the base. Shaft length is about 18mm. I would appreciate any assistance on this.

[doctor]

I've pulled the pot off the board to test and it is bad. I could get the complete board and cable assy., but that's about $60 plus shipping. I'm trying to find a pot, but it's being a tough search. It appears to be an Alpha. I'm going to attach photos in hopes that someone can help me. It's apparently a linear taper 5K from the numbers on the base. The 5 pin configuration is making it a search for a hen's tooth. Korg has something similar, but that's a 10k and I'm not sure if the dimensions are the same. It measures roughly 9mm x 12mm and 5.5mm thick at the base. Shaft length is about 18mm. I would appreciate any assistance on this.
[ATTACH=CONFIG]20661[/ATTACH][ATTACH=CONFIG]20662[/ATTACH]

Try to address to PacParts Company (Casio parts distributor).
Website: Consumer Electronic Parts and Accessories at PacParts, Inc.
E-mail: orders@pacparts.com
Phone: 310-515-0207, 800-421-5080

[01redcobra]

Thanks tons Doctor! They list it on their site, but right now not in stock, awaiting ETA from manufacturer. But definitely a good lead.

[Jinks]

I have the exact same problem; PX-320 volume control pot is dead.

Any joy with finding a substitute part? PacParts still lists this as awaiting ETA...

[01redcobra]

I ended up ordering from Casio in NJ. Got it in a few days. I actually got two and have the spare laying around here somewhere.

[Jinks]

Hey, thanks for getting back to me.

I just pulled the pot apart and discovered the tiny internal spindle was snapped. Cyanoacrylate fixed it and now it works just fine. Happy bunny.