ID these caps ??

[Valvehead]

Heres one for ya guru's

Can you tell what the value and voltage is of these caps ?

They are in a large printer my friend is attempting to get running

[Enzo]

With "220" printed on them, I'd be thinking they were 220uf caps. My eyes see a connector above them which appears associated with them, and I'd wager the two end pinds of that go to the two caps, and the center two pins might be ground? And as such I might think DC from a supply off that board comes in there, with the 220ufs as local filters.


Others may see it differently.

[olddawg]

220uf filter surface mount filter caps. Probably 16v, but I would measure the supplies in circuit.