Tweet
Wanting to change the presence pot to a master volume but I have the older circuit board and not the one with the nice jumpers to rearrange. I found the older schematics and I think I know what to change. Basicly the differences lie in and around the "preamp out" and "power amp in" drivers. What I'm thinking is, could I just rearrange the circuit on the ycv40 to match the ycv50 ? or are there other things to do ? Theres just a few differences in the two. I don't want to end up with the whole "master vol effects the reverb thing"
- New Month We are at $25 this month in Donations.Please consider making a donation.
:)
Comment