Fender PD-250

[livewire]

Hello,

Anyone out there know the biasing procedure for this Fender PD-250 Passport ? I found several shorted outputs nothing else bad. I would like to bias. I have tried monitoring line current, but that is not going to work. Looking for the procedure and the test points and voltage for proper biasing. I have found schematic, but nothing on there pertinent to this issue. Many thanks in advance....

[Enzo]

Apply a sine wave and bias it for when the crossover notch just disappears. That is after all the job of the bias circuit.

[livewire]

Many thanks Enzo. Glad to see you back on here..