Ad Widget

Collapse

Announcement

Collapse
No announcement yet.

DIY USB Guitar Cord

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    DIY USB Guitar Cord

    Hi. I know they are cheap but I am trying to learn about electronics and get practice building my own gear.
    My question is: How would I go about converting a normal guitar cord into a USB connected guitar cord?
    I have looked around online and can't get a clear answer.
    Any help would be appreciated.
    Tags: diy, guitar cord, usb
  • #2
    Originally posted by brodie65708 View Post
    Hi. I know they are cheap but I am trying to learn about electronics and get practice building my own gear...
    Buy one, and disassemble, then reverse-engineer and build one. Then you have two. At least, that's my usual take on stuff... especially if the "genuine article" is "cheap."

    Justin
    "Wow it's red! That doesn't look like the standard Marshall red. It's more like hooker lipstick/clown nose/poodle pecker red." - Chuck H. -
    "Of course that means playing **LOUD** , best but useless solution to modern sissy snowflake players." - J.M. Fahey -
    "All I ever managed to do with that amp was... kill small rodents within a 50 yard radius of my practice building." - Tone Meister -

    Comment

    • #3
      Your question needs to be a little more specific - what do you want to connect your guitar to? Guitar is analogue, USB is digital with power supplied to the interface. You can't stick a USB connector on the end of a guitar cord and plug it into a port. There has to be an interface to convert the guitar's signal to digital. All of the cables you see have an embedded A/D interface built into the USB connector. Quite an adventurous project to build one from scratch, even if you built the interface into a typical Hammond stompbox-sized enclosure

      Comment

      • #4
        Very much doubt it can be done at home.
        Functionally it must have an analog front end, and Analog to Digital converter and some interface to convert that Digital Data into the proper format, handle protocols, secret handshakes, etc. so the computer USB input can receive it and route it to the proper area.

        Tha actual cable innards may look simple, just because it certainly usas a dedicated IC which does all that and then some.

        Those things are cheap just because they are made by the Millions and the dedicated ICs must cost cents.

        Ad then thereīs the software side of the problem.

        No doubt a specialized company in China with a few Electronics and Software Engineers in its staff can reverse engineer a competitorīs product and sell a knockoff for a few cents less, stealing their idea and markets, but for us mere mortals, is way out of reach.

        Now if you want to reverse engineer some analog pedal, a barrety powered guitar amp, etc. , thatīs within reason.
        Juan Manuel Fahey

        Comment

        • #5
          There are a few out there surprisingly cheap! For example there are heaps of "knock off's" of the Behringer UCG 102.
          They are so identical one could be forgiven to think that Behringer gave them all the plans and tooling !! e.g.
          https://www.aliexpress.com/item/High...08.4.16.SzYKEE

          Comment

          Previous template Next
          Working...
          X