Have this ganged switch in my DBX that I need to put back together. See pic. I have seen these same types of switch in receivers etc. There is a little strip metal tab that lays between the two switches. if if hold that tab down (in the center of the the strip), the switches are ganged fine. 1 pushed in pushes the other out and visa versa. But once I put back the long metal bracket (careful not to dislodge the little metal strips or to push in any switch) these no longer work. If I push on a switch it makes both switches unganged and neither will lock anymore. It's something to do with HOW that metal bracket presses on the strips, but I'm at a loss to figure it out. I'm, sure I have the strip oriented correctly. When I took off the bracket, one popped off but I made a note of the other's orientation. Plus, they don't seem to fit on any other way.
Any experts out there that have dealt with these before?
Any experts out there that have dealt with these before?
Comment