Boss re1000 digital multi echo

[bassnote]

Hi everyone hope you can help me. I am repairing the above unit and need to replace two rotary pots labeled decay and warmth on the front panel. The markings on them are :024F 10KB and 074F 50KB and on the circuit board they are referred to as VR9 and VR10, respectively.

Does anyone recognise these markings - I guess it means 10kΩ and 50kΩ ?

I also need to replace both 1/4 in jack sockets on the rear panel referred to as JK3 and JK4 on the circuit board which are plastic body with paddle shaped solder connectors arranged in a line centrally underneath (I will sort a photo eventually).

If anyone is familiar with this boss device I would love to hear from you.

Merry Christmas 07 btw.

[52 Bill]

Welcome to the board!

Yes, they are 10K and 50K linear taper pots (that's what the "B" references).

As for where to get them, here in the states, I would recommend Small Bear, as I know he has the jacks as well, but I will defer to some of our UK posters for sources more local to you.

Happy Holidays to you too.

[Enzo]

I don't do much Boss work, but here also in the USA, I just call ROland and order the Boss pots from the factory.