Hello folks,
I have a cust that would like the Trem on this amp to be more like the 60's versions. The trem on this amp basically just turns the drive to the power tubes on and off in a rather sharp transition, instead of it being a slower more smooth slope-type transition from on to off (or lower volume).
I really am too busy to take time to mess around with values in the ckt at this stage, so I thought I'd put it out there as I have to figure someone else has addressed this issue.
So, anyone messed with this issue & found a solution?
The trem ckt is similar to this Master volume version (this does not have master vol).
See also scope shot: Upper is drive on 6L6 grid, lower is pulse to the neon bulb in the bug.![Click image for larger version
Name: Scope_Shot_1.jpg
Views: 155
Size: 635.4 KB
ID: 993489](filedata/fetch?id=993489&d=1707320920&type=medium)
Thanx, Glen
I have a cust that would like the Trem on this amp to be more like the 60's versions. The trem on this amp basically just turns the drive to the power tubes on and off in a rather sharp transition, instead of it being a slower more smooth slope-type transition from on to off (or lower volume).
I really am too busy to take time to mess around with values in the ckt at this stage, so I thought I'd put it out there as I have to figure someone else has addressed this issue.
So, anyone messed with this issue & found a solution?
The trem ckt is similar to this Master volume version (this does not have master vol).
See also scope shot: Upper is drive on 6L6 grid, lower is pulse to the neon bulb in the bug.
Thanx, Glen
Comment