kldguitar tube Booster effect pedal

[kldguitar]

Put some fire into your tone! This pedal is specially designed to work with magnetic guitar pickups and is based on a subminature OTK 6*2B-K vacuum tube.
The OTK 6*2B-K is manufactured to meet the stringent MIL-E-1 specification for reliability and designed for long service life under conditions of severe shock, vibration (20,000G!), high temperature and high altitude. The subminiature tubes represent the pinnacle of tube technology and offer more consistent musical performance than the early NOS germanium transistors used in Rangemaster-type booster pedals making the Fire Bottle a hi-fidelity boost pedal perfect for studio and touring in even the harshest conditions.
All-Tube: 100% analog tube signal path based on a NOS Mil-spec subminiature OTK 6*2B-K tube.
Boost Control: ranges from 0dB (unity, where the pedal can operate as an audiophile buffer) to substantial 25dB
Tone Control:
Resonance Switch: Tunes the resonant peak of a single coil pickup, lowering it, it sound thicker, fatter and more like humbucker.
True Bypass:
Strong virtually indestructible steel enclosure
•Heavy-duty, industrial footswitches,Check knobs
• On/Off LED indicator
• True Bypass design
• Military-spec glass-epoxy circuit board
• "No tools required" battery compartment (9 volt not included)

[Chuck H]

Wow.!. You have really been paying attention. Looks like a cool product.

If you posted here on someone elses behalf once in a while I might buy one.

As it is you have presented this device to a group of people you have alienated and can easily build one for themselves.

Hmmmm

[J M Fahey]

A 9V battery powering a tube filament?
Does it provide at least one hour playing time?
Wow!!! I just Googled "OTK 6*2B-K".
I did *not* find its datasheet but you *sure* have posted this very same Ad everywhere.
By the way, nice chickenhead knob.

[Steve Conner]

OTK is Russian acronym of "Otdel Tehnicheskogo Kotrolja - Quality Control Department"

It's not the name of the manufacturer.

[J M Fahey]

Hi Steve, do you know anything about this magical tube?
Thanks.

[Steve Conner]

JM, Russian tubes are a pain because they have Cyrillic letters in the name, with no standard conversion to English. This one has a "*" ?! I assume either of two things-

kldguitar censored that letter because he doesn't want us to know what it is

it's the Cyrillic letter "Ж" which would probably be "Zh", as in Dr. Zhivago. The 6Zh2B exists, see this page: http://www.russiantubes.com/prop.php?t=12&p=120

The filament is 180-220mA so you were right on with the 1 hour battery life.

[kldguitar]

About tube name

About the name of tube. It is difficult to found Russion letter in computer, so I have to use the signal close it.
about the battery power, yes, It need good battery.
It is better to us one adpter

[kldguitar]

yes, It is tube we used.

[Steve Conner]

Cool... Have you got any sound clips so we can hear the pedal?

[kldguitar]

I will try some later

Cool... Have you got any sound clips so we can hear the pedal?

I 'll try some later

[kldguitar]

Clips of kldguitar tube booster

I 'll try some later

Diego Budicin reviews Kldguitar pedals: Tubebooster, Rat and Overdrive. - YouTube
It is KLDguitar tube booster clips.

[jmaf]

OTK is Russian acronym of "Otdel Tehnicheskogo Kotrolja - Quality Control Department"

It's not the name of the manufacturer.

Added: I think they have several levels of OTK, as in OTK 2 or OTK 3. I've bought Soviet military tubes off online outlets and they've come with different numbers after the prefix, I don't recall which exactly, but I seem to remember that last time I asked, someone in the know mentioned that above a certain OTK level the tube is roughly equivalent to American JAN tubes.