when i adjust the SUSTAIN knob to low or below 50% the volume also go down, as in zero output sound. its like the sustain knob has become a gain control..
ya think thats normal?
I used 2n5486 as a replacement for the original 2n5457 fet transistor(availability issue)
1n270 for 1n34a
Did some mods too
Output cap 4.7uf to 1uf
Bleeder cap 4.7uf to 10uf
Feedback resistor 220k to 200k
Mods on the tonepad site.
Thank you in advance guys.