Ampeg R-12-R Reverberocket

[Rich]

The schematic I have for this amp is pretty much unreadable.

The preamp tubes are 12AX7 and 12AU7 with 7591 power tubes SS rectifier and 'M - Module' tremolo.

Doesn't appear to be one on line, anyone got one of these?

[ne0]

Saluts!!

[Rich]

Thanks for the effort but I'm looking for a readable version of this schematic.

[doctor]

Thanks for the effort but I'm looking for a readable version of this schematic.

Herwith attached the genuine information for R-12R, R-212R and R-50H models:

[RWood]

Herwith attached the genuine information for

Despite the similar model number, that is not the same amp that he's looking for. His was made 30 years previous by Ampeg of Linden, NJ.

Rich, what are the other two preamp tubes in yours?

[Rich]

Preamp tubes are 3 - 12AX7 and 1 - 12AU7

[jorge muñoz-cobo]

reverbverocket R-12-Rm

hello Rich

I have a reverbverocket R-12-Rm (power tubes 7591) and i cannot read the schematic part of the tremolo and reverb. looking for information i´ve found this forum and your problems with the same amp. so, did you finally found the schematics? could you help me with this?
Thanx a lot,
best,
Jorge

[haydenridd]

I have this schematic!

I recently got my hands on this amp and scanned in the schematic. I've attached it to this post.

hello Rich

I have a reverbverocket R-12-Rm (power tubes 7591) and i cannot read the schematic part of the tremolo and reverb. looking for information i´ve found this forum and your problems with the same amp. so, did you finally found the schematics? could you help me with this?
Thanx a lot,
best,
Jorge