Kustom 745PA schematics wanted

[zero cool]

Kustom 745PA schematics wanted anyone have a link to a good download site for these

[52 Bill]

This one should work for all Wide Panel K200 heads.

The PA models have reverb only on one channel.

[zero cool]

Thanks Bill,

The first channel had some oddity going on with it. I recapped the entire amp now it runs much better. but the first channel has a higher noise floor then the 2nd channel for some reason. I swapped out all the SE4002 transistors for 2N4401A's on the first channel to see if it would make any difference. it didn't so I will swap the SE4002 back in and keep trouble shooting. Once it warms up it starts to crackle and make loud white noise sounds so something is still not right.