Need Behringer MDX4400 Schematic

[bluesfreak]

Hi Ian,

2x 18Vac 0.4A is in my unit (basically it is 18V - CT - 18V, white-black.-white) and this is apparently the stock transformer. When you are in the 220V region remove the blue cable for the 110V Tap from the fuseholder so i can't happen that the fuse is inserted incorrectly and then having overvoltage on the circuit. If you have time can you do the measurements I mentioned in my last post and post your values here (or PM me)?
Have fun!

Stefan

[nullzie]

Hi there!
I just got a Behringer MDX 4400 and unfortuantely it doesnt work. When I push the Power-Button the Peak-Limiter LEDs light up a little bit, but then slowly fade until they're completely dark. Besides the Trannies get extremely hot, even after a few seconds.
I can't find any obviously damaged parts on the boards.
PS. It's the 220V Version

Greets Nullzie